風機接地裝置測試方法探討
張彥昌1，周才洋1，石巍1，袁晨1，姚雯1，柳羽森1，潘露2
（1 中南電力設計院有限公司，湖北 武漢 430071；2 中國葛洲壩集團電力有限責任公司，湖北 武漢 430034）
摘 要：在風機接地工程驗收中，由于各參建單位對測量方法爭議較大，影響了風機接地驗收工作的科學、公正。結合風機制造商及IEC 標準對風電場風力發電機組接地電阻的要求，并基于風機接地網
的特點，重點研究了三極法接地電阻測試方法，給出了風機接地裝置的測試主要原則及方法。
關鍵詞：風機接地裝置；風機接地網；風機接地電阻；三極法
中圖分類號：TM862 文獻標識碼：A 文章編號：1007-3175(2017)10-0065-05
Discussion on Test Method of Wind Turbine Generator Grounding Device
ZHANG Yan-chang1, ZHOU Cai-yang1, SHI Wei1, YUAN Chen1, YAO Wen1, LIU Yu-sen1, PAN Lu2
（1 Central Southern Electric Power Design Institute of China, Wuhan 430071, China;
2 China Gezhouba Group Electric Co., Ltd, Wuhan 430034, China）
Abstract: In the acceptance of the wind turbine generator (WTG) grounding project, since each participating units will have a greater dispute on the measurement methods, the WTG grounding acceptance can’t adhere to the scientific and impartial principle. Combining with the requirements of WTG grounding resistance in wind power plant from the WTG manufacturer and IEC standards, and based on the characteristics of the WTG grounding network, this paper focused on the research of the three-electrode grounding resistance testing method and gave the main testing principle and method of the WTG grounding device.
Key words: wind turbine generator grounding device; wind turbine generator grounding network; wind turbine generator grounding resistance; three-electrode method
參考文獻
[1] IEC 61400-24-2010 Wind turbine-Part 24:Lightning protection[S].
[2] GB/T 21714—2015 雷電防護[S].
[3] IEC 62305：2010 Protection against lightning[S].
[4] G B / T 50065—2011 交流電氣裝置的接地設計規范[S].
[5] GB/T 50064—2014 交流電氣裝置的過電壓保護和絕緣配合設計規范[S].
[6] DL/T 475—2006 接地裝置特性參數測量導則[S].
