母線槽短路耐受強度試驗故障分析 

董雪禮 
鎮江市產品質量監督檢驗中心，江蘇 鎮江 212132 
 

摘 要：針對母線槽在短路耐受強度型式試驗過程中遇到的一些故障，結合IEC60865-1、IEC/TS60865-2和GB7251.2—2006標準，以及試驗過程中采集到的示波圖，分析了產生類似故障的原因。探討了母線槽承受短時間、大電流所形成的電動力和熱效應的能力，并對母線槽導體截面積的選擇排列和絕緣支撐件的布局、安裝方式提出建議。
關鍵詞：母線槽；短路耐受強度試驗；導體截面積；動熱穩定
中圖分類號：TM645.1+1 文獻標識碼：B 文章編號：1007-3175(2015)10-0042-04

Fault Analysis of Busway Short Circuit Withstand Strength Test 

DONG Xue-li 
Zhenjiang Center for Products Quality Supervision & Inspection, Zhenjiang 212132, China 
 

Abstract: Aiming at some faults encountered in the process of busway short circuit withstand strength test, combining with the international standards IEC 60865-1 and IEC/TS 60865-2, national standard GB 7251.2—2006, and oscillograms collected in the experiment, this paper analyzed the causes leading to analogous faults. Discussion was made to the capability of busway forming electrodynamic force and heat effect under a short period of time and large current. This paper puts forward some reasonable suggestions to the selection and arrangement of busway conductor cross-section, layout of insulation support and installation methods.
Key words: busway; short-circuit withstand strength test; conductor cross-section; dynamic thermal stability

參考文獻
[1] GB 7251.2—2006 低壓成套開關設備和控制設備 第2部分：對母線干線系統(母線槽)的特殊要求[S].
[2] IEC 60865-1:2011 Short-Circuit Currents- Calculation of Effects-Part1:Definitions and Calculation Methods[S].
[3] IEC/TS 60865-2:1994 Short-Circuit Currents- Calculation of Effects-Part2:Examples of Calculation[S].
[4] 崔靜，王沙，王陽，段毅，韓東明.低壓配電系統中矩形水平母線動熱穩定計算[J].低壓電器，2013(21)：64-68.
[5] 陸儉國，張乃寬，李奎.低壓電器的試驗與檢測[M].北京：中國電力出版社，2007.
[6] 張白帆.低壓成套開關設備的原理及其控制技術[M].北京：機械工業出版社，2012.