萬能式斷路器使用故障分析與處理

 

王平

（安德利集團有限公司，浙江 樂清 325600）

 

    摘 要：由于部分使用者對萬能式斷路器不甚了解，在實際使用過程中常常出現異常狀況。結合實際案例，從成套配電柜的不規范設計、現場施工的不規范、現場使用及維護人員的誤操作以及斷路器選型不當?shù)确矫?，?duì)萬能式斷路器的使用故障進行了分析與處理，指出設計時應考慮周全，現場施工應符合相關電氣規范要求，對產品不熟悉的情況下不要擅自更改或拆卸斷路器。

    關鍵詞：萬能式斷路器；使用故障；故障分析與處理；維護與檢修

    中圖分類號：TM561     文獻標識碼：A     文章編號：1007-3175(2019)03-0042-04

    Abstract: Because part users poorly understood the universal circuit breaker, there existed abnormal conditions in actual use procedure. Combining with the practical cases, this paper carried out analysis and process for the use malfunction of universal circuit breaker from the aspects of irregular design of power distribution switchgear cabinet, irregular site operation, misoperation of site service and maintenance personnel and improper model selection of circuit breaker etc. It is pointed out that the design should be thoughtful. The site operation should accord with the corresponding electrical code requirement and the circuit breaker shouldn’t be changed and took down under the conditions of unfamiliar products.

    Key words: universal circuit breaker; use failure; fault analysis and treatment; maintenance and overhaul