西門子水冷電機絕緣擊穿特性分析及預防
劉清
（中國石油集團濟柴動力有限公司成都壓縮機分公司，四川 成都 610100）
摘 要：通過記錄西門子1FE1內置水冷電機的接地故障判斷過程，對該類型的電機的結構、特點進行了介紹，分析了電機絕緣特性，并利用實際維修經驗，例舉了引發絕緣擊穿的原因，針對性地提出了預防措施和改進思路，為設計人員完善電機性能，提高絕緣強度，提供了現場依據，也為設備維修人員在現場進行類似故障分析提供了思路。
關鍵詞：數控龍門鏜銑床；水冷電機；變頻電機；匝間絕緣
中圖分類號：TM341 文獻標識碼：A 文章編號：1007-3175(2019)07-0051-04
Analysis and Prevention of Siemens Water-Cooled Machine Insulation Breakdown Characteristic
LIU Qing
（Chengdu Compressor Branch Office of China Petroleum Group JDEC Power Limited Company, Chengdu 610100, China）
Abstract: By recording the earth fault judge process of Siemens 1FE1 built-in water-cooled machine, this paper introduced the structure and characteristics of this type of electric machine, analyzed the electric machine insulation characteristic and used the practical service experience to enumerate the causes triggering insulation breakdown. The precautionary measures were pertinently proposed, as well as the improved thoughts, so that the designer has the site gist to improve the motor performance and dielectric strength and the equipment maintenance personnel have the thoughts to carry out the analogous site faults analysis.
Key words: numerical control plano-boring and milling machine; water-cooled machine; variable frequency motor; turn-to-turn insulation
參考文獻
[1] 黃磊，鄭龍平，李光耀. 水冷電機設計特點分析[J].電機與控制應用，2018，45(12)：4．
[2] 李鴻巖，王峰，郭磊，等. 變頻電機的匝間絕緣電老化機理[J]. 絕緣材料，2005(2)：57-60．
