Suzhou Electric Appliance Research Institute
期刊號: CN32-1800/TM| ISSN1007-3175

Article retrieval

文章檢索

首頁 >> 文章檢索 >> 文章瀏覽排名

一種無刷伺服電機轉子磁鋼自動化粘接設備的設計

來源:電工電氣發布時間:2020-09-17 13:17 瀏覽次數:821
一種無刷伺服電機轉子磁鋼自動化粘接設備的設計
 
劉美鈞,趙志忠,趙建華,管銀,黃桃
(四川航天烽火伺服控制技術有限公司,四川 成都 611130)
 
    摘 要:為了提高電機轉子磁鋼粘接的合格率和效率,在對無刷伺服電機轉子結構和關鍵參數分析的基礎上,設計了一種無刷伺服電機轉子磁鋼自動化粘接設備。該裝置主要由工作臺、產品上料區、成品區、搬運機器人、自動裝配機構、自動涂膠機構、電氣柜等構成。經工藝驗證,該設備的成功運用,解決了此前轉子磁鋼粘接合格率較低的瓶頸,大幅提高了電機生產效率。
    關鍵詞:無刷伺服電機;轉子;磁鋼;粘接
    中圖分類號:TM351     文獻標識碼:A     文章編號:1007-3175(2020)09-0055-03
Design of an Automatic Bonding Device for Rotor Magnets of Brushless Servomotor
 
LIU Mei-jun, ZHAO Zhi-zhong, ZHAO Jian-hua, GUAN Yin, HUANG Tao
(Sichuan Aerospace Fenghuo Servo Control Technology Corporation, Chengdu 6111 30, China)
 
    Abstract: In order to improve the qualification rate and efficiency of motor rotor magnet bonding, based on the analysis of the structure and key parameters of the brushless servo motor rotor, a brushless servo motor rotor magnet automatic bonding equipment was devised. The device is mainly composed of a workbench, a product feeding area, a finished product area, a handling robot, an automatic assembly mechanism, an automatic gluing mechanism, and an electrical cabinet. After process verification, the successful use of this equipment has solved the previous bottleneck of the low qualification rate of rotor magnet bonding, and greatly improved the production efficiency of the motor.
    Key words: brushless servomotor; rotor; permanent magnet; bonding
 
參考文獻
[1] 唐任遠. 現代永磁電機理論與設計[M]. 北京:機械工業出版社,1997.
[2] 張之忠. 微電機結構工藝學[M]. 哈爾濱:哈爾濱工業大學出版社,1997.
[3] 林鳳卿. 高速永磁電動機轉子磁鋼表貼固定方式的分析與研究[J]. 新技術新工藝,2018,40(4):64-66.
[4] 閆志剛,朱軍,吳景暉,等. 智能涂膠機控制系統設計[J]. 微計算機信息,2009,25(4):18-20.
[5] 張曉瑾,胡斯樂,林粵科. 智能涂膠系統的設計與實現[J]. 機床與液壓,2016,44(15):11-14.