變電站電流電壓二次回路全站測試方法研究 

褚國偉1，朱鵬2，歐傳剛2，徐志科2

1 江蘇省電力公司常州供電公司，江蘇 常州 213003；
2 東南大學 電氣工程學院，江蘇 南京 210096 
 

摘 要：提出一種變電站全站測試方法，該法基于變電站綜合自動化系統，結合主接線特點，在變電站進線和低壓母線處布置激勵點，在配電室和繼電室的測控裝置和電能采集裝置處采集二次電流電壓信號從而判別二次回路的接線情況。介紹了測試流程及關鍵技術，試驗結果表明，該法提高了變電站電流電壓互感器二次回路的檢測效率和準確性。
關鍵詞：電流電壓二次回路；全站測試；無線通信
中圖分類號：TM63；TM930.12 文獻標識碼：A 文章編號：1007-3175(2015)02-0047-04

Research on Whole Station Testing Method of Current and Voltage Secondary Circuit in Substation 

CHU Guo-wei1, ZHU Peng2, OU Chuan-gang2, XU Zhi-ke2 
1 Changzhou Power Supply Company, Changzhou 213003, China;
2 School of Electrical Engineer, Southeast University, Nanjing 210096, China 
 

Abstract: This paper presented a kind of whole substation testing method. This method was based on the integrated automation system of substation, combined with the characteristics of the main wiring. The excitation point was placed in the entry lines and low-voltage bus bar of substation, and the current and voltage signals at secondary side were collected in terminals of control device and electric energy acquisition device in distribution room and relay room to judge the wiring connection situation of secondary circuit. Introduction was made to the test flow and the key technology. The field test results indicate that this method has enhanced the efficiency and accuracy of the current and voltage transformer secondary circuit of the substation.
Key words: current and voltage secondary circuit; whole substation test method; wireless communication

參考文獻
[1] 井實.智能變電站二次系統測試方法及其關鍵技術研究[D].成都：電子科技大學，2013.
[2] 雷玉蓮，劉平香.互感器的極性測試與判定[J].大眾科技，2010(2)：128-129.
[3] 李惠庸.淺談新安裝電壓互感器二次接線的檢驗方法[J].機械研究與應用，2008，21(5)：109-112.
[4] 丁書文，黃訓誠，胡起宇.變電站綜合自動化原理及應用[M].北京：中國電力出版社，2002.
[5] 王國光.變電站二次回路及運行維護[M].北京：中國電力出版社，2011.
[6] 劉振亞.國家電網公司輸變電工程典型設計[M].北京：中國電力出版社，2005.
[7] 趙飛.基于DSP的電力系統交流電量同步采集器的研究[D].北京：華北電力大學，2007.