基于JMAG軟件的高速永磁電機的研究與設計
趙龍濤,尹延杰,竇鐘森
山東科技大學 信息與電氣工程學院,山東 青島 266590
摘 要:基于磁路分析設計法,提出了5 kW 高速永磁電機的設計方案,并對設計過程中的電機極數、永磁體厚度、繞組節距以及極弧系數進行了優化仿真。通過JMAG 軟件建模仿真,完成了對高速永磁電機的磁密、磁感線、空負載電動勢以及電機轉矩的分析,該電磁方案可為高速永磁電機設計與優化分析提供一定的理論依據。
關鍵詞:高速永磁電機;JMAG 軟件;仿真
中圖分類號:TM351 文獻標識碼:A 文章編號:1007-3175(2014)02-0017-04
Research and Design of High-Speed Permanent Magnet Motor Based on JMAG Software
ZHAO Long-tao, YIN Yan-jie, DOU Zhong-sen
College of Information and Electrical Engineering, Shandong University of Science and Technology, Qingdao 266590, China
Abstract: Based on the magnetic circuit analysis and design method, this paper proposed the design plan of 5kW high-speed permanent magnet motor and carried out optimized analysis to the motor poles, the thickness of the permanent magnet, the winding pitch and pole arc coefficient.Through the simulation software JMAG modeling, this paper completed the analysis of the high-speed permanent magnet motor flux density,magnetic field lines, air force and the motor load torque. The results show that the electromagnetic scheme can provide certain theoretical basis for high-speed permanent magnet motor design and optimization analysis.
Key words: high-speed permanent magnet motor; JMAG software; simulation
參考文獻
[1] Wen L S, Gerald B K, Roger N J, et al.Novel High-Speed Induction Motor for a Commercial Centrifugal Compressor[J].IEEE Transactions on Industry Application, 2000,36(3):706-712.
[2] 陳燕. 高速電機振動處理及原因分析[ J ]. 電機技術,2010(6):37-40.
[3] 王繼強,王鳳翔,宗鳴. 高速電機磁力軸承- 轉子系統臨界轉速的計算[ J ]. 中國電機工程學報,2007,27(27):94-98.
[4] 程文杰, 耿海鵬, 馮圣, 等. 高速永磁同步電機轉子強度分析[ J ]. 中國電機工程學報,2012,32(27):87-94.
[5] 陳小元,陳超. 場路耦合有限元仿真在電機類課程教學中的應用研究[ J ]. 麗水學院學報,2013,35(2):49-53.
[6] 楊萍,代穎,黃蘇融,等. 基于有限元的車用永磁同步電機的電磁噪聲評估[ J ]. 電機與控制應用,2012,39(9):33-37.
[7] 王鳳翔. 高速電機的設計特點及相關技術研究[J].沈陽工業大學學報,2006,28(3):258-264.