隔離開關裝置的IEC 61850建模
劉俊培1,張敏1,黃國兵2,劉懷照3,張海星4
1 西安工程大學 機電工程學院,陜西 西安 710048;2 西安工程大學 計算機學院,陜西 西安 710048;
3 許繼電源有限公司,河南 許昌 461000;4 許昌供電公司,河南 許昌 461000
摘 要:IEC 61850 標準是電力系統信息技術的重要工具,介紹了IEC 61850 模型的基本概念,分析了面向?qū)ο蟮慕<夹g(shù)?;诖藰藴?,以隔離開關裝置為例,對其進行了功能分解,并利用標準中的信息模型對其邏輯節點及邏輯設備進行了建模,為過程層設備的通信及智能模型建立提供了有力的依據。
關鍵詞:IEC 61850 標準;信息建模;隔離開關裝置
中圖分類號:TM564.1 文獻標識碼:A 文章編號:1007-3175(2014)06-0047-04
IEC 61850 Modeling of Disconnecting Switch Device
LIU Jun-pei1, ZHANG Min1, HUANG Guo-bing2, LIU Huai-zhao3, ZHANG Hai-xing4
1 Mechanical and Electrical Engineering College, Xi’an Polytechnic University, Xi’an 710048, China; 2 Computer Science College, Xi’an Polytechnic University, Xi’an 710048, China; 3 Xuji Power Co., Ltd, Xuchang 461000, China; 4 Xuchang Power Supply Company, Xuchang 461000, China
Abstract: Standard IEC 61850 is an important tool of power system information technology.Introduction was made to the basic concept of the IEC 61850 model and analysis was made to the object-oriented modeling technology. Based on the standard, the disconnecting switch was taken for example to carry out function dissolving. The information model of the standard was used to carry out modeling for its logical node and logical equipment, which provides strong basis for process layer equipment’s communication and intelligent model building.
Key words: standard IEC 61850; information modeling; disconnecting switch device
參考文獻
[1] 吳在軍,竇曉波,胡敏強. 基于IEC 61850 標準的數字保護裝置建模[J]. 電網技術,2005,29(21):81-84.
[2] 陳冬.IEC 61850 規約的理解及使用[J]. 湖北電力,2008,32(1):68-70.
[3] 黃文華,李勇. I E C 61850 標準的技術及應用研究[J]. 現代電子技術,2010(21):93-95.
[4] 李勝,賈占嶺,應站煌. 非綜自變電站改成基于IEC 61850 規約變電站改造方案[J]. 電力自動化設備,2010,30(5):139-141.
[5] 白申義,李剛,周水斌. 基于PowerPC 的隔離開關智能終端設計[J]. 低壓電器,2012(22):11-14.
[6] IEC 61850-5:2008 Communication Networks and Systems in Substations Part5:Communication Requirements for Functionsand Device Models[S].
[7] 謝玉蘋,王銀樂. 基于I E C 61850 的微機饋線保護IED 模型的建立[J]. 電力系統通信,2010,31(1):59-62.
[8] IEC 61850-7-2:2008 Communication Networks and Systems in Substations Part7-2:Basic Communication Structure for Substation and Feeder Equipment-Abstract Communication Service Interface(ACSI)[S].
[9] IEC 61850-7-4:2008 Communication Networks and Systems in Substations Part7-4:Basic Communication Structure for Substation and Feeder Equipment-Compatible Logical Node Classes and Data Classes[S].