一例出口的長輸電線路末端的電力變壓器設計
陳伯根
（福州天宇電氣股份有限公司，福建 福州 350012）
摘 要：設計了一種出口的長輸電線路末端的電力變壓器，分析了由于上級母線和輸電線路產生的阻抗壓降引起的變壓器電源電壓變動時的計算方法，及變壓器一次側調壓方式和電源波動范圍、頻率的關系。指出變壓器設計過程中要針對具體的項目進行綜合分析，合理選擇變壓器參數，改進變壓器結構。
關鍵詞：變壓器；電壓調節(jié)；結構設計
中圖分類號：TM41 文獻標識碼：A 文章編號：1007-3175(2016)10-0020-05
Design of a Case of Export Power Transformer at the
End of Long Transmission Line
CHEN Bo-gen
（Fuzhou Tianyu Electric Co., Ltd, Fuzhou 350012, China）
Abstract: This paper designed a kind of export power transformer at the end of long transmission line. Analysis was made to the calculation method of transformer power supply voltage change caused by impedance voltage drop of superior bus and transmission lines, as well as the relationship of the voltage regulating mode, power supply fluctuation range and frequency at the primary side of transformers. It is pointed out that in the process of transformers design, the comprehensive analysis should be carried out for the concrete project, the reasonable selection should be made for transformer parameters and the transformer structure should be improved.
Key words: transformer; voltage regulation; structure design
參考文獻
[1] 謝毓城. 電力變壓器手冊[K]. 北京：機械工業(yè)出版社，2003.
[2] 樸在林，王立舒. 變電站電氣部分[M]. 北京：中國水利水電出版社，2008.
