基于LabVIEW的斷路器脫扣特性檢測技術
林承志，鄭立新，魏運明，李慶杰
（福建省產品質量檢驗研究院，福建 福州 350002）
摘 要：為了保證斷路器脫扣特性試驗的輸出電流為正弦電流，對該試驗方法進行了研究，并提出了一種基于LabVIEW 的虛擬檢測技術，以PIC18F4620 單片機為核心的選相裝置的設計思路。給出了軟硬件設計過程，將設計出的裝置應用于斷路器的脫扣極限和特性試驗，較好地消除了電流中的非周期分量，且實現了具有控制、數據采集、數據處理、波形顯示等功能的脫扣特性檢測。
關鍵詞：斷路器；脫扣特性；正弦電流；LabVIEW 虛擬檢測技術；選相同步開關
中圖分類號：TM561 文獻標識碼：A 文章編號：1007-3175(2017)08-0055-03
Circuit Breaker Tripping Characteristics Detection Technology Based on LabVIEW
LIN Cheng-zhi, ZHENG Li-xin, WEI Yun-ming, LI Qing-jie
（Fujian Inspection and Research Institute for Product Quality, Fuzhou 350002, China）
Abstract: In order to ensure that the output current is sinusoidal in circuit breakers tripping characteristics testing, this paper researched the testing method, raised the design idea of LabVIEW virtual detection technology with the microcontroller PIC18F4620 as the core phase selection device and gave the design process of software and hardware. The designed device was applied in the circuit breakers tripping limitation and characteristics testing to nicely eliminate the aperiodic component of currents, realizing the tripping characteristics testing with the functions of control, data acquisition, data processing and waveform display.
Key words: circuit breaker; tripping characteristics; sinusoidal current; LabVIEW virtual detection technology; phase selection synchronous switch
參考文獻
[1] GB 14048.2—2008低壓開關設備和控制設備 第2部分：斷路器[S].
[2] 陸儉國，張乃寬，李奎. 低壓電器的試驗與檢測[M].北京：中國電力出版社，2007.
[3] 林承志，鄭立新，蘇金州. 基于高速采集與處理技術的智能電器測試研究[J]. 電工電氣，2012(9)：50-53.
[4] 杜太行， 王曉義， 曲炳鋒， 等. 塑料外殼式斷路器瞬動校驗電流選相合閘技術[J]. 低壓電器，2008(7)：50-53.
