變電站10 kV系統接地方式技術改造

 

謝明磊

（廣東電網有限責任公司梅州供電局，廣東 梅州 514021）

 

    摘 要：為兼顧供電可靠性和人身設備安全，保證發生單相瞬時故障時能促進弧光自熄，且當發生永久性接地故障則發出跳閘信號切除故障線路，將110 kV丙村變電站10 kV不接地系統改造成故障相經電抗器接地系統，闡述了故障相經小電抗接地方式的工作原理，并給出了具體技術改造方案和注意事項，現場調試結果表明，該站技術改造達到了預期目的。

    關鍵詞：不接地系統；故障相經電抗器接地；技術改造

    中圖分類號：TM645     文獻標識碼：B      文章編號：1007-3175(2017)09-0041-03

 

    Abstract: In order to balance power supply reliability and the safety of personnel and equipment, to guarantee the arc light self-extinguishing when the single-phase transient fault occurs, and to send a trip signal to cut off the fault line when a permanent grounding fault occurs, the 10 kV isolated neutral system of 110 kV Bing village substation was reformed to become the reactor grounding system through faulty phase. This paper expounded the working principle of reactor grounding through faulty phase mode and gave the concrete technical transformation plan and matters need attention. The field debugging result shows that this technical transformation reaches the expected goal.

    Key words: isolated neutral system; reactor grounding through faulty phase; technical transformation